What is the operation process of friction welding machine

The operation process of friction welding machine mainly includes the preparation before work, safety protection measures, welding operation steps, emergency treatment and maintenance. ‌

‌1. Preparation before work ‌ :

Make sure that the power and air supply of the friction welding machine are connected and in normal working condition.

Clean the working area of the welding machine to ensure that there is no debris and flammable matter.

Check whether the welding machine equipment and accessories are in good condition, if damaged, repair or replace in time.

2‌, safety measures ‌ :

Operators must wear protective clothing, including protective glasses, protective gloves, protective masks, etc.

Ensure that there is sufficient ventilation around the welding machine to avoid harmful gases and dust.

Smoking and the use of flammable materials such as open flame are prohibited in the work area.

3‌, welding procedures ‌ :

The metal parts of the friction welding machine are fixed on the welding machine workbench to ensure the accurate position of the welding parts.

Turn on the power switch of the welding machine and adjust the speed and heating temperature of the friction welding machine.

Place the friction head on the contact surface of the welded part, and then start the rotation of the friction head.

Keep the pressure of the solder and the heating of the friction head stable until the metal melts and forms a weld.

After stopping welding, turn off the power and air switch of the welder, and remove the welding parts after cooling.

‌4. Emergency handling ‌ :

When an accident occurs, immediately stop the welding operation, and turn off the power and air source switch of the welder.

Report and notify relevant personnel, conduct accident treatment and injury assessment in a timely manner.

‌5, maintenance ‌ :

After the end of work every day, the friction welding machine for the necessary maintenance, including cleaning and lubrication.

Regular inspection of welding equipment and accessories wear, timely replacement and repair.